Removal and Replacement of the Rear Wheel
* Turn the engine off.
* Place vehicle on center stand and remove muffler.
* Loosen the rear wheel nut, and remove the rear wheel.
Installation precautions:
* Torque the rear wheel nut to 40-50ft lbs. and reinstall muffler.
* Verify the rear brake is adjusted properly.
If the tread depth in the middle of the tire reaches the following
limits the tire must be replaced immediately.
Minimum limit of
tread depth
Warning
* Low tire pressure will increase the rolling resistance of the
vehicle, increase fuel consumption, and wear the tire
prematurely. In more severe cases is can lead to flat tires.
Always check tire pressure prior to riding.
* Excessive tire pressure will cause uneven tire wear, increase
the risk for blow outs, and decrease vehicle stability.
Check the tread
wear depth of the
tire and inspect for
damage. If any
abnormality is
found, the tire must
be replaced
immediately.
To Next Page
Loading...
