Service and Maintenance for the Fuse
The fuse is connected in series to the battery. If there is a sudden
power surge or issue within the electrical system, the fuse will
automatically break to protect the battery and other electrical
components. The size of this fuse is 15A
Caution
* In the event of a blown fuse, the cause should be found right
away as it is indicative that there may be a more serious
electrical problem present. In this situation, please bring the
vehicle to your authorized WOLF Brand Scooters dealer for
service.
Service and Maintenance for the Horn
Over time the horn may need to be adjusted. By removing the
front panel, you can access the horn and adjustment screw.
If the entire electrical system of the vehicle is not functioning,
check the fuse first. A blown fuse will cause all electrical
components including the electrical start to stop functioning.
If the horn sound becomes weak or isn’t working at all,
remove the front cover, use a multi-meter to measure the
output voltage of the horn circuit. You must do this with the
ignition turned on. You should measure 12 Volts. If that is
the case, then use the adjustment screw in the middle of the
horn to get the correct horn sound. If you do not get a
correct reading from the multi-meter on the horn circuit,
you should have the vehicle check out by your local WOLF
Brand Scooter Dealer.
To Next Page
Loading...
