32
CONTROL SETUP of PTZ
PTZ ADDR is activated on the upper part on LCD screen, when key
is pressed more than 3 sec, and, the activated menu can be changed
to ROTOCOL , BAUDRATE by pressing & keys.
PTZ ADDR : Setup of PTZ ID.
The initial setup is made 001, and changing ID of PTZ is
done by pressing & keys. The setup is available up
to 255 max.
PROTOCOL : Setup of PTZ PROTOCOL
The initial setup made PELCO-D, and changing
to PELCO-D, PELCO-P, and WONWOO are available,
in
accordance with the protocol mode of PTZ. It is done
by pressing & keys.
To Next Page
Loading...