4
. Functional Use
31
SPST : It memorizes PRESET. Setup can range from 1 up to 99. (short
for SET PRESET).
First, move the camera to the view to be designated , and press
key, and using & keys, place the cursor at the
location of SPST. Then, set up the address that you want to
memorize by using & keys, and then, press key
one more time. The information of location is stored in SPST
adress.
TOUR : It operates TOUR set up at SPST and MENU. Setup can be from
1 up to 99. TOUR can be designated in the MENU of PTZ.
SPD : Place the cursor at the location of SPD, applying the procedures
described above. Total 16 steps(from 1 to 16) of speed are
available to be selected using & keys.
MENU : Place the cursor at the location of MENU, applying the procedures
described above. The MENU of PTZ itself is available to be
displayed on LCD screen. using key.
C A U T I O N
㯲
Make sure to check for communications protocol, transmission
speed, and ID.
To Next Page
Loading...