Wood-mizer BMS25 - Page 23

Blade Support Installation
WM doc 1/20/21 3-9
3
9. Repeat the steps for each of the other tubes.
NOTE: The left and right blade guide supports must be assembled with
the post away from the outer end of the support tube. See Fig. 3-5.
NOTE: The rear blade guide supports must be assembled with the
post closer to the outer end of the support tube. See Fig. 3-6.
FIG. 3-5
FIG. 3-6
TD-BMS25-10
support tube
flanged nylok hex nut
wing nut
pushnut ring
blade support wheel
blade support guide
with post
bolt
blade support guide
without post
130205-R-11
support tube
flanged nylok hex
nut
wing nut
blade support guide
pushnut ring
blade support
wheel
blade support guide
with post
bolt