default chapter3

Chapter 8. Service Tools11

Chapter 9. Peripheral Devices13

Chapter 10. Application Notes30

Overview30
Example Applications32
Example 1-Pump or Compressor Discharge Pressure Control with Turbine Inlet Pressure Limiting33
Figure 10-1. Pump or Compressor Discharge Pressure Control with Turbine Inlet Pressure Limiting33
Example 2-Inlet Pressure Control with Automatic Synchronizing & Generator Power Limiting36
Figure 10-2. Inlet Pressure Control with Automatic Synchronizing & Generator Power Limiting36
Example 3-Exhaust Pressure Control with Generator Power Limiting and Plant Import/Export Limiting40
Figure 10-3. Exhaust Pressure Control with Generator Power Limiting and Plant Import/Export Limiting40
Example 4-Plant Import/ Export Control with SPC Servo Interface43
Figure 10-4. Plant Import/Export Control with SPC Servo Interface44
Example 5-Inlet Pressure Control with Isochronous Load Sharing Control in Island Mode47
Figure 10-5. Inlet Pressure Control with Isochronous Load Sharing Control in Island Mode48
Example 6-Import/Export Control or Exhaust Pressure Control with Isoch Load Sharing in Island Mode51
Figure 10-6. Import/Export Control or Exhaust Pressure Control with Isoch Load Sharing in Island Mode51
Example 7-Induction Generator Applications54
Example 8 - Extraction Turbine Mechanical Drive (Pump or Compressor) with Discharge Pressure Control and Turbine Inlet Pressure Limiting55
Figure 10-7. Pump or Compressor with Discharge Pressure Control and Turbine Inlet Pressure Limiting55
Example 9 - Extraction Turbine Inlet and Extraction Pressure Control with Automatic Synchronizing & Generator Power Limiting59
Figure 10-8. Inlet Pressure Control with Automatic Synchronizing & Generator Power Limiting59

Chapter 11. Operator Interface64

Chapter 12. Service Menu Procedures67

Chapter 13. Understanding Pid Settings101

Chapter 14. Hardware/Operating System Faults114

Appendix D. Password Information133

Appendix E. Servlink-To OPC Server (SOS) Tool134

Appendix F. Control Assistant-Software Interface Tool138

Appendix G. Appmanger Service Tool145

Appendix H. Configuring Network Tcp/Ip Addresses152

Appendix I. Remoteview Tool155

Appendix J. Using 505 Internal Simulation Mode165

Figure J-1. HW Simulation Mode Access165

Appendix K. Custom Tag Name Procedure166

Appendix L. Startup Guide167

Commissioning Checklist167

Appendix M. Datalogs169

Brand	Woodward
Model	350108V2
Category	Control Unit
Language	English

Woodward 350108V2 Product Manual

Table of Contents

Other manuals for Woodward 350108V2

Questions and Answers:

Woodward 350108V2 Specifications

Related product manuals