Need help?Do you have a question about the Woodward DSLC and is the answer not in the manual?
General| Brand | Woodward |
|---|---|
| Model | DSLC |
| Category | Control Unit |
| Language | English |
Explains the DSLC's digital signal processing for synchronization and phase matching.
Details the DSLC's load control functions using digital signal processing for accuracy.
How to use the Hand Held Programmer for setup and adjustments.
Detailed explanations of all set points organized by menu.
Details set points for synchronizer functions (Sync Gain, Stability, etc.).
Details set points for load control functions (Gain, Stability, Droop).
Details set points for process control functions (Gain, Stability, Reference).
Steps to perform before starting the control for the first time.
Procedures for adjusting the DSLC control functions.
Procedure for setting up kW droop operation for load control.
Procedures for adjusting synchronizer functions, phase, and slip frequency.
Setup procedure for phase matching synchronizer dynamics.
Setup procedure for slip frequency synchronizer dynamics.
Final steps for synchronizer setup and performance verification.
Procedures to verify correct operation of the synchronizer voltage matching function.
Adjustment procedure for MOP-driven voltage regulators.
Adjustment procedure for voltage bias input to voltage regulators.
Instructions for setting up and adjusting the DSLC Load Control.
Setup procedure for proportional base load control.
Setup procedure for integrating base load control.
Procedure to set up and verify the isochronous load sharing mode.
Instructions for setting up and adjusting the DSLC Process Control.
Describes setup and adjustment of the DSLC VAR/PF Control function.
Functions for automatic control of generator loading and unloading.
Describes applications for automatic load control.
Tests for DSLC control functionality, calibration, and configuration.
Information for verifying network operation and troubleshooting.
Available options for service and support of Woodward products.
Factory options for servicing: Replacement/Exchange, Flat Rate Repair.
Worksheet for recording Synchronizer Menu 1 set points.
Worksheet for recording Load Control Menu 2 set points.
Worksheet for recording Process Control Menu 3 set points.
Worksheet for recording VAR/Power Factor Control Menu 4 set points.
Worksheet for recording Configuration Menu 5 set points.
Lists part numbers for various DSLC control units and their configurations.
Details electrical specifications including power supply, inputs, and outputs.
Lists obsolete and replaced part numbers for DSLC controls.
To Next Page
