Need help?Do you have a question about the Woodward TecJet 52 Gen II and is the answer not in the manual?
General| Number of Ignition Outputs | 4 |
|---|---|
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 4 |
| Number of Analog Inputs | 4 |
| Model | TecJet 52 Gen II |
| Operating Temperature | -40°C to +85°C |
| Communication | CAN |
| Type | Electronic Control Unit |
| Application | Engine Control |
Safety alerts, definitions of hazard terms, and precautions for safe operation.
Precautions to prevent damage to electronic components from static electricity.
Details European and UK compliance directives relevant to the product.
Overview of the TecJet 52, its features, and physical connections.
Details configurable parameters and the associated service software.
Installation overview, safety warnings, and mounting instructions.
Dimensional drawings and mounting details for the TecJet 52.
Details on main connector, mating connectors, and wiring practices.
Covers shielded wiring, grounding, and various input/output signal connections.
Configuration and wiring for CAN bus communication.
Introduces configuration, power-on, and normal operation procedures.
Explains valve diagnostics, status indications, and error reporting.
Details SAE J1939 and CANopen communication protocols.
Describes the feature for holding valve position during analysis.
Lists electrical, mechanical, and fuel connection specifications.
Details temperature, vibration, shock, and EMC specifications.
Lists acceptable fuel gas compounds and pressure ranges.
Describes the accuracy and performance of the TecJet 52 fuel metering.
Guidance on comparing TecJet 52 flow rates for different conditions.
Graphs illustrating flow capacity for specialty and natural gas.
Introduces the Service Tool, its purpose, and installation.
Explains how to use overview, troubleshooting, warnings, and errors screens.
Covers viewing configuration settings and product identification.
Guides on editing various settings and loading them to the control.
Lists status indications and their causes/actions.
Lists common warnings, their causes, and possible actions.
Lists common errors, their causes, and possible actions.
Discusses deposit build-up and applicability of maintenance.
Step-by-step instructions for cleaning the TecJet 52 valve.
Outlines options for obtaining product support.
Lists available product service options like repair and exchange.
Instructions for returning equipment for repair and proper packing methods.
Information on engineering services and how to get technical assistance.
To Next Page
