What to do if Worcester Control Unit display is blank or shows low battery?
If your Worcester Control Unit displays a blank screen or shows a low battery symbol, it likely means the batteries are depleted. Replace them to resolve this issue.
What to do if Worcester Control Unit displays a blank screen or low battery symbol?
If your Worcester Control Unit's display is blank or shows a low battery symbol, it means the batteries are depleted. Replace the batteries to fix this.
What does error 1007 mean on Worcester Comfort+ II RF Control Unit, and how to fix it?
Error 1007 on your Worcester Control Unit indicates that there is no wireless signal. To fix this, check the signal strength and reposition the control unit in a better location.
What does error 1017 mean on Worcester Comfort+ II RF, and how to fix it?
Error 1017 on your Worcester Control Unit means the system pressure is too low. You should fill the system to resolve this issue.
What does error 1009 mean on Worcester Comfort+ II RF Control Unit, and how to fix it?
Error 1009 on your Worcester Control Unit indicates a lack of wireless signal or a failed connection. You should reconnect the wireless device.
What does Worcester Control Unit error 1037 mean, and how to resolve it?
Error 1037 on your Worcester Control Unit means that weather-compensated control is enabled, but either no outside temperature sensor is connected or the sensor's batteries are dead. To resolve this, you can either select room temperature-dependent controls or connect an outside temperature sensor. If a sensor is already connected, replace its batteries.
What to do if Worcester Control Unit says maintenance overdue?
If your Worcester Control Unit displays error 1072 indicating maintenance is overdue, it means that maintenance is overdue by 14 days. Inform the installer that maintenance is overdue.
What to do if Worcester Control Unit says maintenance due on?
If your Worcester Control Unit displays error 1070 indicating that maintenance is due on a specific date, it signifies that maintenance is approaching. Inform the installer that maintenance should be carried out within the next 30 days.
What does Worcester Control Unit error 309x mean?
Error 309x (where x is the number of heating circuit) on your Worcester Control Unit indicates that the control unit temperature sensor is faulty because it is outside the permissible range. Replace the control unit.
What does Worcester Comfort+ II RF Control Unit error 1071 mean?
Error 1071 on your Worcester Control Unit indicates that maintenance is now due. The hardware maintenance is due. Notify the installer.
General| Display | LCD |
|---|---|
| Temperature control range | 5°C to 30°C |
| Power supply | 2 x AA batteries |
| Mounting | Wall-mounted |
| Control Type | Programmable |
| Compatibility | Worcester Bosch boilers |
| Type | Wireless Programmable Thermostat |
| Communication | Radio Frequency (RF) |
| Features | Frost protection, Holiday mode |
| Range | Up to 30 meters |
To Next Page
