Open Source Software
17
Greenstar 8000 + – 6721890759 (2024/06)
15 Open Source Software
15.1 List of used Open Source Components
This document contains a list of open source software (OSS)
components used within the product under the terms of the respective
licenses. The source code corresponding to the open source
components is also provided along with the product wherever mandated
by the respective OSS license.
Table 11
Provided that within certain OSS-Licenses (e.g. LGPL-2.0) necessary,
reverse-engineering is allowed for the respective software component
to the required extent. This shall not apply for other components of the
software.
15.2 Used Commercial Source Components
15.2.1 This product contains software developed and licensed by
SEGGER Software GmbH
15.3 Appendix - License Text
15.3.1 BSD (Three Clause License)
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:
Ā Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Ā Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the
distribution.
Ā Neither the name of the <ORGANIZATION> nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
15.3.2 MCD-ST Liberty Software License Agreement v2
SLA0044 Rev5/February 2018
BY INSTALLING COPYING, DOWNLOADING, ACCESSING OR
OTHERWISE USING THIS SOFTWARE OR ANY PART THEREOF (AND THE
RELATED DOCUMENTATION) FROM STMICROELECTRONICS
INTERNATIONAL N.V, SWISS BRANCH AND/OR ITS AFFILIATED
COMPANIES (STMICROELECTRONICS), THE RECIPIENT, ON BEHALF
OF HIMSELF OR HERSELF, OR ON BEHALF OF ANY ENTITY BY WHICH
SUCH RECIPIENT IS EMPLOYED AND/OR ENGAGED AGREES TO BE
BOUND BY THIS SOFTWARE LICENSE AGREEMENT.
Under STMicroelectronics’ intellectual property rights, the
redistribution, reproduction and use in source and binary forms of the
software or any part thereof, with or without modification, are permitted
provided that the following conditions are met:
1. Redistribution of source code (modified or not) must retain any
copyright notice, this list of conditions and the disclaimer set forth
below as items 10 and 11.
2. Redistributions in binary form, except as embedded into
microcontroller or microprocessor device manufactured by or for
STMicroelectronics or a software update for such device, must
reproduce any copyright notice provided with the binary code, this
list of conditions, and the disclaimer set forth below as items 10 and
11, in documentation and/or other materials provided with the
distribution.
3. Neither the name of STMicroelectronics nor the names of other
contributors to this software may be used to endorse or promote
products derived from this software or part thereof without specific
written permission.
4. This software or any part thereof, including modifications and/or
derivative works of this software, must be used and execute solely
and exclusively on or in combination with a microcontroller or
microprocessor device manufactured by or for STMicroelectronics.
5. No use, reproduction or redistribution of this software partially or
totally may be done in any manner that would subject this software to
any Open Source Terms. “Open Source Terms” shall mean any open
source license which requires as part of distribution of software that
the source code of such software is distributed therewith or
otherwise made available, or open source license that substantially
complies with the Open Source definition specified at
www.opensource.org and any other comparable open source license
such as for example GNU General Public License (GPL), Eclipse
Public License (EPL), Apache Software License, BSD license or MIT
license.
6. STMicroelectronics has no obligation to provide any maintenance,
support or updates for the software.
7. The software is and will remain the exclusive property of
STMicroelectronics and its licensors. The recipient will not take any
action that jeopardizes STMicroelectronics and its licensors'
proprietary rights or acquire any rights in the software, except the
limited rights specified hereunder.
8. The recipient shall comply with all applicable laws and regulations
affecting the use of the software or any part thereof including any
applicable export control law or regulation.
9. Redistribution and use of this software or any part thereof other than
as permitted under this license is void and will automatically
terminate your rights under this license.
10.THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS, IMPLIED OR
STATUTORY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY
INTELLECTUAL PROPERTY RIGHTS, WHICH ARE DISCLAIMED TO
Name
of OSS
Compone
nt
Version
of OSS
Compon
ent
Name and Version of
License
(License text can be
found in Appendix
below)
More Information
STM32
cube
generated
files
Unspecifi
ed
BSD
(Three Clause License)
(Æ Kap. 15.3)
Copyright © 2016
STMicroelectronics
Copyright © 2014
STMicroelectronics
STMC4Lib-
IAR
Unspecifi
ed
BSD
(Three Clause License)
(Æ Kap. 15.3)
Copyright ©
2009 - 2015
ARM LIMITED
Copyright © 2016
STMicroelectronics
stm32f30x Unspecifi
ed
MCD-ST Liberty Software
License Agreement v2
(Æ Kap. 15.3)
Copyright © 2012
STMicroelectronics
To Next Page
Loading...
