Worcester Wave - Manual Mode and Time Programme; Hot Water; Temporary Hot Water Adjustment

10
Operation
Worcester Wave– 6 720 810 446 (2014/09)
Hold (Long press)
▶ Press and hold an up or down key to change the displayed
temperature quickly.
4.1.2
Manual mode/time programme
The time programme can only be set using the Worcester Wave
app. on your smart device.
Fig. 15 Choose manual mode/time programme
[1] Manual mode ring
[2] Time mode ring
▶ Briefly press the manual mode or time program key to
switch between these functions.
4.2 Hot Water
4.2.1 Combi boilers
The boiler preheat function must be enabled to allow the Wave
to take control of your hot water.
Refer to your combi boiler user guide to enable the preheat
function, i.e. turn the ECO function off.
For combi boilers the hot water screens are only accessible
when the hot water control is enable by you in the app.
4.2.2 Temporarily adjusting the HW time programme
Tap the “Time programme” icon twice to enter the HW timed
function, tap either the “HW timed” icon to switch the hot water
ON until the next time period or “HW not timed” icon to switch
the hot water OFF until the next time period.
Tap the “back” icon to return to the normal screen.
Fig. 16 Hot water screens
520520
6720810446-27.1Wo
1 2
23
.5
°C



20
.5
6720810446-17.1Wo