PH: 866.476.9217 20
X. STORAGE
1. When not in use the GO-A13-HA should be stored in a clean, dry &
sheltered area, safely out of the way.
2. If a sheltered area is not available and/or not practical, WORKMASTER's
water-proof, puncture and tear resistant Protective Cover will provide
excellent protection from both the elements and unloading site debris. See
Section XI: Accessories for ordering information.
3. For prolonged storage (more than 2-weeks), the GO-A13-HA should be
operated, at free-speed, for about 10-minutes. This will allow oil to coat the
Impactor's internal components.
4. All accessories including the Drive Fitting, should be stored in the
GO-A13-HA's Tool Box. Do not leave these items attached to the Impactor if
they are not being used.
To Next Page
Loading...
