WORKMASTER GO-A13-HA - Specifications and Components

PH: 866.476.9217 3
IV. SPECIFICATIONS AND COMPONENTS
To operate to GO-A13-HA effectively the user should be familiar with each of the Gate
Opener's components. See Figure 1 for a Component Layout, and the separate
WORKMASTER GO-A13-HA Gate Opener Maintenance & Parts Manual
(PN: 10-00069).
The GO-A13-HA Pneumatic Hopper Car Gate Opener consists of a heavy-duty
reversible impact motor, self-closing lever control mechanism and a Rolling Cart. The
GO-A13-HA Opener is portable, rugged and capable of operating in the toughest
environment. Under recommended operating conditions and with regular maintenance,
the GO-A13-HA Opener can generate up to 13000 ft./lbs. torque. The Impact Motor is
air driven and requires a source of clean, dry compressed air for operation.
Every user should be aware of the technical specifications and operating characteristics
shown below in Table 1.
Table 1: Technical Specifications
CHARACTERISTICS
GO-A13-HA
Frame Dimensions
40"L x 42"W x 44"H
Handle Width
29"
Weight
361 Lbs (Shipping 520 Lbs)
Working Area Required
8 -10 Ft
Working Torque Range
1000 – 13000 Ft-Lbs
Free Speed
1500 RPM
CFM/PSI Free Speed
148 @ 85 PSI
CFM/PSI Impacting
114 @ 85 PSI
Inlet Coupling
Universal Style w/ Safety Lock Pin
Wheel Assembly
16" Dia w/ 4.80 / 4.00 – 8" Flat-Free
Solid Polyurethane w/ ribbed tread
Anvil Size
1-1/2"
Lubrication
Air Tool Oil
Retainer Type
Socket Pin w/ O-Ring
Hose Size
1" ID
Height Adjustment
Pneumatic Adjustments 10" – 24"