Need help?Do you have a question about the WorkPro LS-Node Series and is the answer not in the manual?
Provides critical safety notes for installation, use, and maintenance of the LS-Node device.
Details the LS-Node series, its format, power options, and multiprotocol capabilities.
Lists the items included in the LS-Node package: the device, USB cable, and power adapter.
Illustrates the front and rear views of LS-Node models, showing ports, indicators, and connections.
Explains how to access and configure LS-Node devices via the WebServer interface for network setup.
Details how to configure individual ports for input/output, protocol, direction, frame rate, and universe settings.
Guides on configuring LS-Node ports to output DMX signals from ArtNet/sACN inputs, including Single and Merger modes.
Explains how to set LS-Node ports as input to convert DMX to ArtNet/sACN, supporting Normal and Backup modes.
Provides step-by-step instructions for updating the LS-Node firmware via the device's web server interface.
Details the procedure to restore the LS-Node to its original factory state using the physical reset button.
Provides contact details for Equipson SA and local distributors for technical assistance and inquiries.
To Next Page
General