NOTICE!
Risk of damage!
Improper handling of the compressor may result in damage.
− If possible, use wedges to secure the wheels of the compressor to prevent
it from rolling away when you are using it.
− Do not insert any objects in the compressor.
− Only use the designated handles to transport the compressor.
− Always keep the compressor in an upright position to prevent oil from leaking.
− Before each use, make sure that there is enough oil in the compressor.
− When the compressor is starting, a brief voltage drop may occur, particularly
if the mains quality is poor. These drops can affect other devices (e.g. lights
may flicker). For grid impedance Z
max
< 0.322 Ω, such disruptions cannot be
expected. Please contact your local energy utility for more information.
To Next Page
Loading...
Need help?
General
