• Injury to health attributed to vibration emissions if the device is used
over a prolonged period of time or is not guided and maintained
properly,
• Injury and damage to property caused by projected parts or tool
adapters that break during use,
• Injury to health caused by working with toxic materials or materials
posing a risk to health (e.g. asbestos).
ATTENTION! When using power tools, the following
basic safety measures must be taken in order to
provide protection against electric shocks, risk of
injury and fire.
Read all these notes before using the power tool and keep the safety
instructions in a safe place. Failure to follow the safety instructions and
instructions may result in an electric shock, fire and/or severe injury.
The user manual and, in particular, the safety instructions must be
carefully read and adhered to by each user before beginning work.
Work using this device may only be performed by persons who have
been instructed in how to use the cordless hammer drill and who have
been advised on the associated risks.
The manufacturer of the cordless hammer drill is not liable for damage
caused by the cordless hammer drill or damage to the cordless hammer
drill in the event of:
• improper handling or improper use,
• failure to observe the user manual,
• repairs by a third party, unauthorised specialist workshops,
• installation and replacement of non-original replacement parts,
• failures of the electrical system due to failure to comply with electrical
guidelines and provisions.
Safety
10
WZ-5451513-Bedien-1611_(24) 22.11.16 15:24 Seite 10
To Next Page
Loading...
Need help?
General
