1. Make sure that the cordless hammer drill and the accessories are
completely dry.
2. Fold up the mains cord so that it does not knot or kink.
3. Always place all accessories and especially the drill bits (16) and the
bits (15) back in the storage case (19) to prevent the loss of accessory
parts.
Repairs
Risk of electric shock!
Repairs performed by the user or the use of unsuitable spare
parts to repair the device poses an increased risk of electric
shock.
− Do not open the housing. Liability and warranty claims are
void in the event of repairs performed by the user,
improper connection or incorrect operation. Have your
power tool serviced by a qualified repair person using only
identical replacement parts.
− Only parts that comply with the manufacturer’s
specifications may be used for repairs. The drill contains
electrical and mechanical devices which provide essential
protection against sources of danger.
Troubleshooting
Some problems may be caused by minor faults that you can fix yourself.
To do so, follow the instructions in the following table.
If it is still not possible to resolve the problem with the cordless hammer
drill, contact the after sales support. Do not in any case attempt to
repair the cordless hammer drill yourself.
Troubleshooting
30
WZ-5451513-Bedien-1611_(24) 22.11.16 15:24 Seite 30
To Next Page
Loading...
Need help?
General
