HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 7 -
3.1.3 Pitch and Modulation touch strips
If you touch the Pitch bend strip at its center and move your finger forward or backward it will alter the pitch of the played
sound. The range of the pitch bend is determined by the preset that has been selected.
Similarly, moving your finger along the Modulation strip alters the modulation amount of the played sound. The level of
modulation introduced by activating the modulation strip depends on which preset is selected.
Note:The modulation strip may not be assigned to modulate a parameter in some presets.
Pitch and Modulation strips
3.1.4 Shift and Pad Bank buttons
Let’s start on the right: The Pads 1-8/9-16 button toggles the TUNAMINI pads between two different sets of eight pad
assignments. 1-8 is the first set and 9-16 is the second set. Press the Pads1-8/9-16 button the led backlit will be lighting
which means the 9-16 pads set is working. The default setting for Pad 9-16 is Control Change No., so it won’t make any
sound when pressed.
The Shift button serves two purposes: recalling one of eight presets from memory (Shift+ pad. For example, press ‘Shift’
and PAD1 at the same time will recall the bank1. Recalling Bank1 is necessary if you want to map the encoders and sliders
to your DAW as the default mode for these two is relative, but it’s absolute mode in Bank1 which is compatible for that in
your DAW.), selecting the master MIDI channel (Shift + keyboard. For example, press ‘Shift’ and the Key corresponding to
Numeric 2 will select MIDI Channel 2 as master MIDI Channel. ).
The Shift and Pad Bank buttons
3.1.5 Octave buttons
Pushing one of the down or up buttons will transpose the keyboard by as much as four octaves up or down. Press the
To Next Page
Loading...
