HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 17 -
5.1.8 Save the changes to a Preset
So let’s review what we’ve done in section 5.1 so far: The pads have been set up to play kick and snare, toggle the filter
settings, and start/stop the song; one of the encoders is controlling the vibrato rate, and the Mod strip is controlling
Aftertouch. Not bad! There’s a lot more TUNAMINI can do, but that’s a good start.
So the next thing to do is make sure this configuration is available when you want it. To do that, you need to save these
settings as a group into one of the eight memory locations in the TUNAMINI.
The upper right-hand section of the TUNAMINI software editor has a button called “Send to Keyboard”. Right below that is
a pull-down menu that allows you to specify which of the TUNAMINI’s eight memory locations will be the repository for the
Preset you’ve created.
Before clicking the top button, select a location you know is available. We’ll use memory location #2 for this example:
Select #2 in the drop-down list as pictured above.
Once you’re sure where the preset will be stored, click the “Send to Keyboard” button:
That’s all there is to it! The preset you created has been safely stored to memory location #2, and can be recalled by using
the Shift button and Pad #2 together. See section 5.1.8 below for details.
5.1.9 Recalling a Preset / Switching between Presets
Once you’ve created a couple of presets you can switch between your personalized configurations very quickly. This is as
simple as it can be: simply hold the Shift button and press one of the pads.
To Next Page
Loading...
