HANGZHOU WORLDE DIGITAL PIANO CO.,LTD HANGZHOU WORLDE MUSIC ELECTRONIC CO., LTD
WEBSITE: WWW.WORLDE.COM.CN EMAIL:SALES@WORLDE.COM.CN TEL:86 571 88730848
- 9 -
the sliders to the controller No. as required. For example, No.11 is the expression controller in MIDI standard, so if you
want to use Slider 1 as expression control, you should assign CC No.11 to Slider1 with WORLDE TUNAMINI software
editor, then the Slider1 will control the expression of your DAW. Standard MIDI CONTROLLER PARAMETER LIST can be
found in the Appendix.
The Parameter control sliders
3.2 Side panel overview
The side panel of the TUNAMMINI contains two important connectors: the footswitch jack and a USB Type B jack.
Side panel
The footswitch jack functions as an on/off switch and can be configured for either momentary applications (such as sustain
pedal) or latching behavior (first press/release sends one event, second press/release sends the next event). The default
is sustain control(No.64). Use the WORLDE TUNAMINI software editor to assign the pedal to other functions. It can be
assigned to 128 different control No.
Note: the default setting for footswitch jack is open meaning that pressing the pedal will function as sustain. If it’s without
sustain function when pressed, it means that the pedal polarity is opposite, so it needs to adjust the polarity by moving the
pedal polarity switch to the other end.
To Next Page
Loading...
