5. Enclosure Care and Maintenance
5.1 Suggested Preventative Maintenance
The table below provides a list of care and maintenance procedures and the intervals at which
they should be performed. You may add additional procedures in the provided spaces.
Test Emergency Stop button for proper operation. Reference Section 5.2
below.
Perform general cleaning (clean out and wipe down machine).
5.2 E-Stop Button Test Procedure
Press the Emergency Stop button (the RED extended portion). The indicator light will flash red.
To re-establish a Ready status, twist the E-Stop button until the RED portion pops up. (Indicator
light will stop flashing red)
6. Schematics
To Previous Page
Loading...