WG162 WG162.9
Voltage
20V MAX*
No Load Speed 7600/min
Cutting Diameter 12 inch (30cm)
Line Diameter 0.065 inch (1.65mm)
Battery type Lithium-ion
Battery capacity WA3525 (2.0Ah) /
Charger Model WA3742
Charger rating
Input: 120V-60Hz
Output. 20V=, 0.4 A
/
Charging time (approx.) 5hr /
Machine Weight 5.5 lbs (2.5 kg) 4.6 lbs (2.1 kg)
*Voltage measured without workload. Initial battery voltage reaches a maximum of 20 volts. The nominal voltage
is 18 volts.
ACCESSORIES
WG162 WG162.9
Safety guard 1 1
Flower guard 1 1
Charger (WA3742) 1 /
Battery pack (WA3525) 1 /
Edger wheel 1 1
Spool (WA0004) 1 1
Only use the appropriate accessories intended for this tool. Accessory information can be found on the product
packaging, at a WORX dealer or on our website at www.worx.com or by calling 1-866-354-WORX(9679).
WARNING: any other accessory or attachment may increase the risk of injury.
To Next Page
Loading...
