TECHNICAL DATA
WG160 WG160.1 WG160.2 WG160.3 WG160.4 WG160.9
Voltage
20V
Max*
Cutting diameter 12”(30cm)
Line diameter 0.065”(1.65mm)
Charging time 5 hrs approx. 2 hrs approx. /
Machine weight 5.7lbs 6.3 lbs 4.9lbs
WG175 WG175.1
Voltage
32V Max**
Cutting diameter
12”(30cm)
Line diameter
0.065”(1.65mm)
Charging time
3 hrs approx.
Machine weight
6.2lbs
* Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
** Voltage measured without workload. Initial battery voltage reaches maximum of 32 volts.
Nominal voltage is 28.8 volts.
ACCESSORIES
WG160 WG160.1 WG160.2 WG160.3 WG160.4 WG160.9
Safety guard 1
Charger 1 (WA3742) 1(WA3868) /
Battery pack 1 (WA3525) 2 (WA3525) 2(WA3578) /
Edger/trimming
support wheels
1 2 1
Spool 3 (WA0004)
WG175 WG175.1
Safety guard 1
Charger 1 (WA3740)
Battery pack 1 (WA3537) 2 (WA3537)
Edger/trimming
support wheels
1
Spool 3 (WA0004)
Only use the appropriate accessories intended for this tool. Accessory information can be found
on the product packaging, at a WORX dealer or on our website at www.worx.com.