24
9. Follow instructions for lubricating,
chain tensioning and changing
accessories. Improperly tensioned
or lubricated chain may either break or
increase the chance for kickback.
10. Keep handles dry, clean, and free
from oil and grease. Greasy, oily handles
are slippery causing loss of control.
11. Cut wood only. Do not use jaw
saw for purposes not intended. For
example: do not use jaw saw for
cutting plastic, masonry or non-wood
building materials. Use of the jaw saw
for operations different than intended
could result in a hazardous situation.
12. Recommendation for the use of a
residual current device with a tripping
current of 30 mA or less.
FOR JAW SAW WITH THE
EXTENDED POLE SAFETY
WARNINGS
1. Do not use the machine when the operator
is tired, ill or under the influence of alcohol
or other drugs.
2. To reduce the risk, please keep bystanders
at a safe distance from the machine during
its operation.
3. Be aware of the dangerous of operating
positions, as well as the risk of being
struck by falling branches or branches
that, having hit the ground, rebound, the
operator may be struck by falling branches
or by those that rebound after hitting the
ground. Remove the branches in sections.
4. Keep a firm footing and balance during
operating. Use the harness provided.
5. Keep the machine a sufficient distance
away from overhead electrical power lines.
SYMBOLS
Read the manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to rain
Remove plug from the mains
immediately if the cable is damaged
or cut.
Double insulation
Wear head protection
Protective gloves
Protective footwear
Warning of danger from overhead
electric-power line
To Next Page
Loading...
Need help?
General
