EasyManua.ls Logo

Worx WG322E - User Manual

Worx WG322E
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WG322E WG322E.9 WG323E WG323E.9
Cordless Chain Saw
Аккумуляторная цепная пила
EN
RU
P09
P24

Other manuals for Worx WG322E

Questions and Answers

  • T
    Tracy GarrettSep 8, 2025
    Why is my Worx WG322E Chainsaw overheating?
    • K
      Kevin BridgesSep 8, 2025
      If your Worx Chainsaw is overheating, place it in a cool, ventilated area to cool down. Also, avoid applying too much pressure while cutting; use relatively less pressure instead. If the issue persists, it could be due to a loose connection, defective internal wiring or a defective on/off switch, in which case you should contact a service agent.
  • L
    lbeckSep 10, 2025
    What to do if Worx WG322E Chainsaw is out of battery?
    • S
      sarahruizSep 10, 2025
      If your Worx Chainsaw is out of battery, charge the battery pack. If the fuse is faulty, replace it.
  • A
    Amy ParkerSep 12, 2025
    Why does my Worx Chainsaw chain/chain bar overheat?
    • J
      James HamiltonSep 12, 2025
      If your Worx Chainsaw's chain or chain bar overheats, it could be due to several reasons: * There's no oil in the reservoir: Refill the oil. * The vent in the oil filler cap is clogged: Clean the cap. * The oil passage is clogged: Clean the oil passage outlet. * The chain is over tensioned: Adjust the chain tension. * The chain is dull: Sharpen or replace the chain.
  • K
    Kristin MorrisonSep 13, 2025
    What to do if Worx WG322E operates intermittently?
    • M
      Mr. Steve JeffersonSep 13, 2025
      If your Worx Chainsaw operates intermittently, it may be overheating. Place the machine in a cool, ventilated place to cool it down. Also, you might be applying too much pressure while cutting. Try applying relatively less pressure while cutting. For loose connections, defective internal wiring or a defective on/off switch, contact a service agent.
  • K
    Kimberly RodriguezSep 15, 2025
    What to do if my Worx WG322E is out of battery?
    • E
      Erin McgeeSep 15, 2025
      If your Worx Chainsaw is out of battery, you should first charge the battery pack. If that doesn't resolve the issue, try replacing the fuse.
  • W
    wmaxwellSep 18, 2025
    Why Worx WG322E Chainsaw operates intermittently?
    • P
      Patricia BaldwinSep 18, 2025
      If your Worx Chainsaw operates intermittently, consider the following potential causes: * The saw may be overheating. Allow the saw to cool down. * You might be applying too much pressure while cutting. Reduce the pressure. * There could be a loose connection. Check and secure all connections. * The internal wiring may be defective. Inspect and replace any defective wiring. * The On/Off switch could be defective. Check and replace the switch.

Worx WG322E Specifications

General IconGeneral
TypeCordless Chainsaw
Power SourceBattery
Battery Voltage20V
Chain Pitch3/8 inch
Automatic OilingYes
Oil Tank Capacity120 ml
Motor Power600 W
Bar Length25 cm
Chain Gauge1.3 mm (0.05 inch)

Related product manuals