Lawn Mowing Robot EN
10
3.2 How does my Landroid
®
M
know where to go?
Your Landroid
®
M is capable of doing things on its own. The
Landroid
®
M knows when it needs to go to its Charging Base (4) to
charge, can sense when it is raining, can stop itself if it senses a
problem, and knows to stop and turn around when it bumps into
something blocking its path, such as a person, pet, or other object.
The Landroid
®
M will also automatically stop its Blade Turning Disc (13)
from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
®
M needs to recharge, it will stop mowing and
follow the Boundary Wire (21) in an anti-clockwise motion back to
its Charging Base. To save energy, the Landroid
®
M chooses not to
rotate its Blade Turning Disc when returning to its Charging Base.
B. Rain sensors
The Landroid
®
M has a Rain Sensor (9) at its side that will sense
rain drops and tell the Landroid
®
M to stop mowing and follow the
Boundary Wire back to its Charging Base (See Fig. B).
The Landroid
®
M is programmable to have a delay start function
(0 – 180 mins) when it rains. When the rain sensors are wet, the
Landroid
®
M returns to its docking station. Only when the rain
sensors become dry will the Landroid
®
M begin the delay start
countdown or return to mowing immediately. See the Programming
and Troubleshooting Guide for more details.
C. Sensing the boundary wire
The Landroid
®
M always obeys the border set by the Boundary
Wire and uses two sensors at its front to sense when it is getting
close(See Fig. C). Before changing direction, the Landroid
®
M will overrun the Boundary Wire up to 20cm*.
*This is the recommended distance. Use the provided distance gauge to ensure proper installation.
D. Starting and stopping while mowing
If you would like to command the Landroid
®
M to stop mowing, then simply press the STOP button (8) on top of the mower.
To start mowing, press the ON/OFF key, press start key directly or open the Control Panel Cover and input your further
commands, at last press START key (See Fig. D,E).
B
C
To Next Page
Loading...
Need help?
General
