Why the LED light on Worx Landroid Lawn Mower charging base does not turn on?
If the LED light on the charging base of your Worx Landroid lawn mower does not turn on, the cause may be that there is no power. Check that the charging base is properly connected to the charger and that the charger is connected to a suitable power supply.
What to do if Worx Landroid Lawn Mower cannot dock with the charging base?
If your Worx Landroid lawn mower cannot correctly dock with the charging base, try restarting it. Additionally, clean the contact pins on both the charging base and the charging strip on the Landroid using a cloth to ensure a good connection.
Why does my Worx Landroid Lawn Mower stop in the working area?
If your Worx Landroid lawn mower is stopping in the working area, first check for any obstacles and remove them. If there are no obstacles, the cutting height may be set too low for the grass length or the grass may be too dense. In this case, raise the cutting height. Also, ensure that the extended boundary wire does not exceed 350m, and the distance between the center of the lawn and the boundary wire is within 25m.
How to set the correct time on Worx Landroid Lawn Mower?
If your Worx Landroid lawn mower is not operating at the correct time, ensure the clock is set accurately. Also, verify that the programmed cutting times are correctly set. If you are using the app, check the percentage of weekly operating time set through the app, and correct it if necessary.
What to do if my Worx Landroid Lawn Mower displays ‘– E1 –’ error?
If your Worx Landroid lawn mower is displaying ‘– E1 –’ within its working area, and the boundary wire is connected, the boundary wire ends may be clamped incorrectly. Try reversing the boundary wire ends and reconnecting them to the charging station.
Why do Worx Landroid Lawn Mower wheels skid?
If your Worx Landroid lawn mower wheels skid or slip, check for foreign objects like twigs or branches lodged underneath the unit and remove them. Additionally, if the lawn is too wet, wait until it dries before operating the mower.
Why Worx Landroid Lawn Mower run-times are getting shorter?
If your Worx Landroid lawn mower is experiencing shorter run times between charges, there might be a few reasons. Start by inspecting the blade disc for clogs that could be causing friction and increasing power consumption. Clean the blade disc thoroughly. Also, check for an unbalanced blade disc, and replace the blades if needed. If these steps don't resolve the issue, the battery may be nearing the end of its life and need replacement, or the working time needs to be reset.
Why is my Worx Landroid Lawn Mower cutting grass unevenly?
If your Worx Landroid lawn mower is cutting grass unevenly, several factors could be at play. First, ensure the mowing schedule allots enough hours daily for effective cutting. If the mowing area is too large for your Landroid model, consider reducing the area or increasing the working time. Check the blades; dull blades should be replaced along with their screws to maintain balance. Adjust the cutting height if it's too low for the grass length, raising it gradually. Also, inspect the blade disc for obstructions like grass or debris, and clear any buildup in the blade disc or motor frame box, ensuring the blade disc rotates freely.
Detailed safety warnings and instructions for proper and safe operation of the machine.
Key warnings for safe operation, keeping distance, and environmental disposal advice.
Lists and illustrates all the components included in the product packaging.
Identifies and labels key parts of the Landroid, such as sensors, ports, and controls.
Instructions on maintaining the sharpness of cutting blades and replacing them.
Guidelines for regularly cleaning the Landroid's upper body, bottom, wheels, and charging contacts.
Advice on proper battery charging, storage, and manual charging procedures.
Recommendations for preparing and storing the Landroid during the winter season.
Instructions for updating the Landroid's software wirelessly via Wi-Fi.
Steps to check the current software version installed on the Landroid.
Guide on how to update the Landroid's software manually using a USB stick.
Details the causes and recommended actions for various error messages displayed by the Landroid.
Provides solutions for common symptoms, such as no power, unbalancing, or uneven cutting.
General| Battery Voltage | 20 V |
|---|---|
| Battery Capacity | 2.0 Ah |
| Maximum Lawn Size | 500 m² |
| Cutting Height Range | 30-60 mm |
| Power Source | Battery |
| Cutting Height Adjustment | Central |
| Maximum Incline | 35% |
| Mowing Area | 500 m² |
To Next Page
