Worx WX477 Manual

Jigsaw EN
11
NOISE INFORMATION
WX477 WX477.1 WX478 WX478.1 WX479
A weighted sound pressure L
pA
:86.0dB(A) L
pA
:87.4dB(A)
A weighted sound power L
wA
: 97.0dB(A) L
wA
: 98.4dB(A)
K
pA
& K
wA
3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841:
WX477 WX477.1 WX478 WX478.1 WX479
Cutting wood
Vibration emission value a
h
= 4,195m/s
2
a
h
= 5,074m/s
2
Uncertainty K = 1.5m/s
Cutting steel
metal
Vibration emission value a
h
= 7,848m/s
2
a
h
= 9,548m/s
2
Uncertainty K = 1.5m/s
The declared vibration total value and the declared noise emission value have been measured in
accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used especially what kind of workpiece is
processed dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration and noise accessories are used.
And the tool is being used as intended by its design and these instructions. .
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched off and
when it is running idle but not actually doing the job. This may significantly reduce the exposure level over
the total working period.
Helping to minimise your vibration and noise exposure risk.

Worx WX477 Specifications

General

Brand	Worx
Model	WX477
Category	Power Tool
Language	English