Leveling the printing platform
Use the big hex wrench to loosen the four screws on both sides of
the platform counterclockwise so that the aluminum plate can move
up and down freely.
27
Big hex wrench
Handle
Big hex wrench
Aluminum plate
＊
Notice:
❶
Do not unscrew the screw completely.
❷
Make sure the handle is fully tightened.
❸
Please ensure that there are no residual resin
or obstacle on the aluminum plate and the tank
to affect the leveling.
❹
Make sure the tank is installed correctly.
Leveling the printing platform
To Next Page
Loading...