To Next Page

To Previous Page

Check after unpacking

Open the package to confirm that the components are integrity

then

check the printer's functions to ensure that it works properly.

❶

Test power function:

Connect the power supply. After the printer is powered on

confirm that if

the indicator of the knob is working properly ，and the indicator of the knob will display the Light blue

lightlight if it working properly .

❷

Test knob function and Z-axis motion:

Rotate the knob to confirm whether it can control the

printing platform move up and down

and whether the knob rotates smoothly.

❸

Test photoelectric switch:

Remove the printing platform and continue to rotate the knob clockwise

to control the lifting cantilever to descend until the trigger piece on the lifting cantilever is inserted into

the photoelectric switch groove to trigger it to conrm whether the lifting cantilever stops.

❹

Test print function:

Remove the printing platform

download the print file

"print.wow"



for

SparkMaker

version



"print.fhd"



for

SparkMaker FHD

version



from

SparkMaker

official

website



www.sparkmaker

d.com



and save it to the SD card. Insert the SD card with the print le into

the printer card slot and the indicator of the knob will become the green breathing light

then press

the knob to start printing. At this time

the indicator light changes from green to red and flashes

the

lifting cantilever will drop to the position of the trigger photoelectric switch

then the light board will

emit

ultraviolet light

the fan will start to work

the screen will display the bottom layer pattern

and wait for a

bottom exposure time. After that

the light board is extinguished

the lifting cantilever will rise a certain

distance

and then decline again

then the light board emit ultraviolet light

and the screen displays the

next pattern... Continue this process until the end of printing.

❺

Test tank:

Check if the FEP membrane at the bottom of the tank has obvious scratches or broken

holes. Pour some water into the tank to check if it will leak.

Product working principle

SparkMaker

SLA 3D printer

Designing a 3D solid model through 3D software

slice the model with

SparkStudio

the

generated data will be used to accurately control the switch of the light board and the

movement of the lifting platform through the main board. The light beam emitted by the light

board passes through the controllable liquid crystal screen and is irradiated onto the surface

of the liquid photosensitive resin according to the designed path. Curing a layer of resin in a

specic area of the surface. When this layer is processed

a section of the model is generated.

The lifting platform is raised by a certain distance

the solid layer is covered with another layer

of liquid resin

and then the second layer is scanned

and the second solidified layer is firmly

bonded to the previous solidified layer

so that the layers are superposed to form a three-

dimensional model. After the model is taken out of the resin

clean the resin on the surface

of the model with alcohol

and the nal curing

and then polished

painted or colored to get the

desired product.

Check after unpacking

Product working principle

Brand	Wow
Model	SparkMaker
Category	3D Printers
Language	English

Wow SparkMaker User Manual

Table of Contents

Questions and Answers:

Wow SparkMaker Specifications