WTC View-R - Page 39

M038170_V1.5_View-R/11-2021
37 of 39 Chapter 7: View-R Software Update Procedure
STEP 2: MAIN UPDATE
2.1 ) Click “Browse” from the Update pane and select the
“(main) update” (Only applicable when updating from
Version 1.x.x. For all View-R Version 2.x.x and greater
select the single Update file).
2.2 ) Double-click the update file. Notice the file will now be
displayed in the Update pane. Click Submit.
2.3 ) The View-R Status pane will display “Preparing to
reboot...”. Once the update is completed, the View-R will
automatically reboot within 1 minute and the Status pane
will change to “Running...”.
2.4 ) To confirm the update check information displayed in the
System pane. View-R version should now display the
update.
This completes the update procedure.