-
11
-
Problem Reason Solution
The turntable rotate just in
one direction or can’t rotate.
Reverse Switch broken Replace the Reverse Switch
Demount or fix the wheel, the
turntable can’t lock (spin with
wheel);
The jaws delay to open/close;
The turntable locks the rim
incorrectly.
Leakage of Air network Check all the parts on the air network.
The clamping cylinder can’t work. Replace the cylinder piston.
Broken washers of the chuck
cylinder
Replace it.
The mounting head/demounting head
always touch the rim during
operation.
The locking plate incorrectly adjust
or unqualified.
Replace or adjust it.
Screws on the chuck loose; the
Vertical Arm can’t be locked by
Tighten the screws; replace the
Locking Plate.
The Bead Breaker Pedal and Jaw
open and close Pedal can’t turn back
to the original position.
pedal spring broken Replace it.
The Bead Breaker shovel operates
difficultly.
Jammed silencer Clean it or replace it.
The washer on the Bead Breaker
cylinder is broken.
Replace it.
To Next Page