Würth 9501006290 - Exploded Drawing

-
11
-
Problem
Reason
Solution
The turntable rotate just in
one direction or can’t rotate.
Reverse Switch broken
Replace the Reverse Switch
Demount or fix the wheel, the
turntable can’t lock (spin with
wheel);
The jaws delay to open/close;
The turntable locks the rim
incorrectly.
Leakage of Air network
Check all the parts on the air network.
The clamping cylinder can’t work.
Replace the cylinder piston.
Worn jaws
Replace the jaws.
Broken washers of the chuck
cylinder
Replace it.
The mounting head/demounting head
always touch the rim during
operation.
The locking plate incorrectly adjust
or unqualified.
Replace or adjust it.
Screws on the chuck loose; the
Vertical Arm can’t be locked by
Locking Plate
Tighten the screws; replace the
Locking Plate.
The Bead Breaker Pedal and Jaw
open and close Pedal can’t turn back
to the original position.
pedal spring broken
Replace it.
The Bead Breaker shovel operates
difficultly.
Jammed silencer
Clean it or replace it.
The washer on the Bead Breaker
cylinder is broken.
Replace it.
-
12
-
15. Exploded drawing:
21100
JZ08001021100
Machine body
23175
JZ09001023175
Bead breaker buffer
23041
JZ09001023041
Lifting lever
15826
JZ03001015826
Bracket
22719
JZ09001022719
Bead breaker arm rubber
29067
IY08002029067
Grease
23088
JZ09001023088
Front panel