26
Complete Set list
* TIG 200 pulse inverter TIG welder
1 piece
* Product Qualification Certificate
1 piece
* Warranty Card
1 piece
* Operator’s Manual
1 piece
Accessories – easy-broken parts
* TIG welding torch
1 piece
* Pottery muzzle（1piece in the welding torch）
3 pcs
* Tungsten electrode holder（1piece in the welding torch）
3 pcs
* Electrode pressing cap（1piece in the welding torch）
Long/short each
1 piece
* Earthing cable（with earthing clamp）
1 piece
Note: a) No guarantee for the easy-broken parts
b) If purchasing contract additionally agreed, the contract will be prior.
Delivery and Storage
* This series welders are base structure and should be delivered by fork vehicle or salver.
Before delivery, fix the welder well.
Note: forbid to deliver the welder by handles
* During the delivery and storage, avoid rain or snow affects to the welders. Notice the warning
information on the cartons in loading. Make sure the welder storage dry, ventilation, without caustic
gas or dust, temperature between -25
~
+ 55℃, relevant humidity no more than 90%.
* If the welders need to be stored after the carton already unpacked, repack as the old package
demands (clean, dry and covered with plastic bag before storage)
* Keep well the cartons, quakeproof blocks, got in purchasing time, for the long distance delivery. If
long distance delivery needed, pack with wooden case and make the “UPPER”, “Rain Proof” sign.
To Next Page
Loading...
Need help?
General
