07 08
Note:
1. You should ensure the device is power off when open the top cover.
2. You need to clean the filter basket after each use.
3
4
5
Take out the filter basket and cotton
foam.
Empty all debris and rinse it with clean
water.
As electric components inside the
cleaner, store the cleaner in a cool and
ventilated place, away from direct sun-
shine or any heat source.
Charge the cleaner prior to being stor-
ed for a long time (over 6 months) to
maintain an optimal battery life.
After rinsing, put the filter basket and
cotton foam into the cleaner and close
the cover.
You should take the cleaner out verti-
cally to drain inside water out quickly.
5
The device will automatically move to
stop by the edge of wall when finishing
cleaning or battery low.
You can insert the included hook into
a pool pole and lift the cleaner out of
the pool.
6
DO A FILTER CLEANING
1
2
Press the filter cover handle and lift the cover up.
4
3
About 20 seconds of self-calibration,
the indicator light will turn to be a flashing
blue. The cleaner is ready to clean.
The cleaner begins to clean walls, floor
and waterline as default or your set
through App.
7
MODE
MODE
MODE
To Next Page
Loading...
