Antenna Aiming
When using the optional Home Docking Station or
the Boombox indoors, it is important to locate the
antenna in an acceptable location (See the
individual installation guides for more information).
1. Use the Rotary Knob to highlight “Antenna
Aiming”. Press the Rotary Knob to select.
2. Two 10 segment horizontal bar graphs will be
displayed ( SAT and TER) with a “-“ sign to the left
and a “+” sign to the right. SAT indicated satellite
signal and TER indicates terrestrial signal – if
available.
3. Adjust the antenna for maximum performance as
per the manuals.
To exit this function, press the Rotary Knob or
MENU button.
Memory Options
In this mode, the user can turn the Memory
Search Function (S-Seek) ON or OFF. In addition,
all 30 Preset Memory Locations can be cleared.
To change the Memory Options, use the following
procedure while in the “Menu Options” List
mode:
1. Use the Rotary Knob to highlight the “Memory
Options”. Press the Rotary Knob to select.
2. Select one of the following Memory Options:
a. Automatic Memory Search function - On or
Off: Use the Rotary Knob to select between On
and Off by highlighting the desired selection.
Then press the Rotary Knob to store.
b. Clear All Memory Locations: Press and
release the Rotary Knob; a prompt display
screen appears confirming - Clear All Memory
Select “Yes” or “No” and press the Rotary
Knob.
To exit this function, press the Rotary Knob or
MENU button.
To Next Page
Loading...
General