Factory Default
This Menu option will restore all original factory
settings. To activate this feature, perform the
following procedure while in the “Menu Options”
List Mode:
1. Press Menu to enter the Menu Options List.
2. Use the Rotary Knob to highlight the “Factory
Default” option. Press the Rotary Knob to select.
“Restore Settings” will pop up on the Receiver’s
display
.
3. Use the Rotary Knob to select “Yes” to restore all
settings or select “No” to return to the Menu
Options List Mode.
Use the Rotary Knob to select the desired Sleep
Time. When the desired time is highlighted,
press the Rotary Knob. The Receiver will now
turn off after the selected time has elapsed.
to enter the menu. Once in the Auto Shutdown
Menu, use the Rotary knob to select either
“Enable” or “Disable” the feature.
• Cancel Auto Shutdown: If you want to
temporarily deactivate the Auto Shutdown
feature once the beep tone sounds, press the
Rotary Knob. The Auto Shutdown sequence will
reset to 1 hour.
e. Sleep Mode: You can program the unit to
shutdown after a selected period of time. The
screen displays Sleep Mode on the top line, with
optional time settings as follows:
Sleep Off
15 Minutes
30 Minutes
45 Minutes
60 Minutes
To Next Page
Loading...
General