Need help?Do you have a question about the Xantrex HPD 30-10 and is the answer not in the manual?
General| Model | HPD 30-10 |
|---|---|
| Output Voltage | 0-30 V |
| Output Current | 0-10 A |
| Output Power | 300 W |
| Input Voltage | 100-240 VAC |
| Input Frequency | 50/60 Hz |
| Voltage Resolution | 10 mV |
| Current Resolution | 1 mA |
| Cooling | Fan cooled |
| Current Accuracy | 0.1% + 10 mA |
| Operating Temperature | 0 to 40°C |
| Storage Temperature | -20°C to 70°C |
| Efficiency | >85% |
Describes the manual's intended audience and the purpose of the document for users.
Provides a breakdown of the main sections and their content within the operating manual.
Introduces the XT Series power supplies and lists the available models with their ratings.
Details the primary operational features and capabilities of the XT Series power supplies.
Lists optional hardware and accessories that can enhance the functionality of the power supplies.
Describes the controls, indicators, and displays located on the front panel of the power supply.
Identifies and explains the connectors and outputs found on the rear panel of the unit.
Provides detailed technical electrical performance specifications for various models.
Outlines the operating environment limits and physical characteristics of the power supply.
Lists the physical dimensions and weight for different configurations of the power supply units.
Covers initial physical inspection of the unit and basic setup procedures.
Provides guidance on routine cleaning and procedures for returning units for service.
Instructions on how to properly package the power supply for shipping or long-term storage.
Details on how to mount the unit in a rack and ensure adequate ventilation.
Explains how to safely connect the power supply to an AC power source.
Describes procedures to test the power supply's functionality after installation.
Provides essential precautions and guidelines for making safe and effective load connections.
Details on selecting appropriate wire size, insulation, and length for load wiring.
Explains proper grounding techniques to avoid ground loops and minimize noise.
Compares local sensing with remote sensing and when to use each method.
Explains the two basic operating modes: Constant Voltage and Constant Current.
Details on how to operate the supply in Constant Voltage (CV) and Constant Current (CI) modes.
Describes the automatic switching capability between CV and CI modes based on load conditions.
Covers configurations for connecting multiple units in series, parallel, or split supply.
Outlines the terms, duration, and coverage of the product's limited warranty.
Provides contact information and procedures for obtaining warranty service and support.
Defines safety symbols and outlines general warnings and cautions for using the power supply.
Specifies conditions not covered by the warranty and legal disclaimers.
Provides the physical address and contact details for Xantrex Technology Inc.
To Next Page