30
7 Troubleshooting
General
PROBLEM: Measured inverter output is too low.
Inverter Powered by DC Input Cable
PROBLEM: AC product will not operate, no inverter
lights are
ON.
Possible cause Remedy
Standard “average-
reading” AC voltmeter
used to measure output
voltage, resulting in an
apparent reading 5 to 15 V
too low.
Inverter’s “modified sine
wave” output requires “true
RMS” voltmeter for accurate
measurements.
Vehicle battery or
Powerpack voltage is too
low.
Recharge vehicle battery or
Powerpack.
To Next Page
Loading...
