XCMG XE210C - Page 19

XE210C Hydraulic Excavator Operating and Maintenance Manual 19
 When leaving the machine, be sure to lower the
working devices down to the ground completely and
then shut down the engine. Lock all equipment, take
off the keys and put them in the safe places.
Handrails and steps
To avoid injury for the personnel climbing up and down the
machine, the following requirements must be followed:
 When climbing up and down the machine, use the handrails and steps marked by the triangular arrows
in the drawing.
To ensure the safety, face the machine, keep hold at the three points (two feet and one hand or two hands and
one foot) tightly, and step on the handrails and steps (including the track shoes) tightly.
 When climbing up and down the machine, do not hold the operating lever, and do not walk on the
engine without non-slip mat or cover plate.
 When climbing up and down the machine, check the handrails and steps (including the track shoes)
for oil contamination, lubrication grease or mud. If there are these materials there, wipe off
immediately.
 It is banned to climb up and down the machine with tools in the hand.