XE210C Hydraulic Excavator Operating and Maintenance Manual 30
The machine directly moves on the slop upward
and downwards, because it is very dangerous to
make a turn or traverse on the slop.
Do not make a turn and transverse on the slop. The
machine should change the position of the machine
at the flat area, and then, go up to the slope.
Because the slipping of the machine on the slop of
a small degree is dangerous, the machine should
walk on the slop at low speed.
In the engine misses when the machine is moving
on the slop, the operating lever must be shifted to
the middle position to start the engine.
To Next Page
Loading...
