OFF-LINE SETUP MENU
XES SYNERGIX 8850 PRINTER OPERATOR MANUAL 21
Table 1. Printer Menu options (continued)
Option Sub-option Function
TEST PLOT Allows you to run a test print in off-line mode
from each media source. The selections are
ROLL 1, ROLL 2, ROLL 3, and BYPASS.
PRINTER DIAGNOSTICS Reserved for use by the service
representative and is password protected.
DIAGNOSTICS
RECENT FAULT LOG Displays a record of the last 99 printer faults.
You may be asked to provide information from
this log when placing a call for service.
METER A Provides a record of the total number of
square feet/meters of prints produced. This
number is useful for both billing and service
purposes.
BILLING METERS
METER B Provides a record of the total number of linear
feet/meters of prints produced. This number
is useful for both billing and service purposes.
To Next Page
Loading...
Need help?
General