CARE
32 XES SYNERGIX 8850 PRINTER OPERATOR MANUAL
CAUTION: Ensure that the stopper is firmly in place to avoid
spillage of toner.
4. Snap the stopper into place on the top of the used toner waste
bottle.
5. Remove the stopper from the top of the new toner waste
bottle.
6. Snap the stopper into place on the front of the new toner
waste bottle.
7. Slide the new toner waste bottle onto the mounting bracket.
• Push the bottle forward until you feel it snap into place.
8. Close the front door.
CAUTION: Do not reuse the contents of the toner waste bottle.
Reuse of this material will damage the printer.
9. Place the used toner waste bottle in the plastic bag provided in
the replacement carton.
10. Place the used toner waste bottle in the replacement toner
carton.
• Ensure that the carton contains the used toner cartridge
as well. Recycle the used cartridge and waste bottle
according to the instructions provided with the
replacement carton.
To Next Page
Loading...
Need help?
General