Xerox AltaLink B8090 - Versalink C7000, C7020, C7025, C7030

Xerox® Security Guide for Office Class Products: AltaLink®  VersaLink®
November 2018 Page 37
VersaLink® C7000, C7020, C7025, C7030
Physical Overview
.
1. Stabilizer
2. Bypass paper feed tray
3. USB2.0 (Host Type A)*
4. Touch screen user interface.
5. Upper paper tray
6. Lower paper tray
7. Paper feed trays
8. Caster wheels
9. USB3.0 (Target Type B)*
10. Optional Wi-Fi dongle port*
11. RJ45 Ethernet connection*
12. Debug serial port (DIN)*
(Located under steel plate)
13. AC Power
Security Related Interfaces
Ethernet
10/100/1000 MB Ethernet interface.
Optional Wi-Fi Dongle
Supports optional 802.11 Dongle.
Rear USB 3.0 (Type B)
USB target connector used for printing.
Note: This port can be disabled completely by a system administrator.
Front Panel Optional
USB2.0 (Type A) port(s)
Users may insert a USB thumb drive to print from or store scanned files
to. (Physical security of this information is the responsibility of the user
or operator.) Note that features that leverage USB ports (such as Scan
To USB) can be disabled independently or restricted using role based
access controls.
Firmware upgrades may be applied using this port.
Connection of optional equipment such as NFC or CAC readers.
Note: This port can be disabled completely by a system administrator.
Encryption and Overwrite
Encryption
AES-256
TPM Chip
TPM chip is standard and cannot be disabled.
Media Sanitization
Immediate and On-Demand Image Overwrite.