6. To adjust the length and width guides to fit the paper, pinch the guide locks, then slide the paper
guides in until they touch the paper.
7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color.
• If letterhead paper is loaded in the printer, for type, select Letterhead.
• If pre-printed paper is loaded in the printer, for type, select Pre-printed.
9. To confirm the settings, touch Confirm.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to
Configuring Dedicated Paper Trays.
192
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
