Xerox AltaLink B81 Series User Manual

4. To open the staple cartridge clamp, pull the clamp in the direction shown.
5. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks
into the locked position.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
6. Grasp the staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until the staple cartridge clicks into place.
7. Return the stapler assembly to the original position, then close the finisher door.
318
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Troubleshooting

Xerox AltaLink B81 Series Specifications

General

Brand	Xerox
Model	AltaLink B81 Series
Category	All in One Printer
Language	English