Xerox® Security Guide for Office Class Products:  AltaLink®  VersaLink® 
November 2018   Page  39 
 
 
VersaLink® B400, B405 
Physical Overview 
1.  Upper Paper Tray 
2.  Special Paper Feed 
3.  Front Bezel 
4.  USB 2.0 (A) 
5.  Touch Screen User Interface , Power 
Button and Optional NFC 
6.  Document Feeder 
7.  Catch Tray 
8.  Catch Tray Extension 
9.  Jam Clearance Open 
 
10.  Lower Paper Tray 
11.  Optional SSD Install Location 
12.  SSD Install Location Cover 
13.  AC Power 
14.  Foreign Device Interface 
15.  USB 3.0 (B) 
16.  Optional Wireless Adapter Connector 
17.  RJ-45 Ethernet Connector 
18.  RJ-11 Fax and Telephone Connector 
 
 
Security Related Interfaces 
10/100/1000 MB Ethernet interface. 
Supports optional 802.11 Dongle. 
USB target connector used for printing. 
Note: This port can be disabled completely by a system administrator. 
Front Panel Optional 
USB2.0 (Type A) port(s) 
Users may insert a USB thumb drive to print from or store scanned files 
to. (Physical security of this information is the responsibility of the user 
or operator.)  Note that features that leverage USB ports (such as Scan 
To USB) can be disabled independently or restricted using role based 
access controls. 
Firmware upgrades may be applied using this port. 
Connection of optional equipment such as NFC or CAC readers. 
Note: This port can be disabled completely by a system administrator. 
 
Encryption and Overwrite 
TPM chip is standard and cannot be disabled. 
Immediate and On-Demand Image Overwrite.