Xerox AltaLink C81 Series - Page 106

Adding color effects
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Color Presets.
Note: This feature is not available when Output Color is set to Black and White.
4. On the Color Presets screen, touch the required preset color effect. The sample images show how
the colors are adjusted.
5. Touch OK.
Adjusting the Saturation
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Saturation.
4. To adjust the saturation, move the slider.
5. Touch OK.
EErraassiinngg tthhee EEddggeess ooff CCooppiieess
You can erase content from the edges of your copies using the Edge Erase feature. You can specify
the amount to erase on the right, left, top, and bottom edges.
To erase the edges of copies:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Edge Erase.
4. Select one of the following options.
• All Edges: This option erases all four edges by the same amount. To adjust the amount to
erase, move the slider.
• Individual Edges: This option allows you to specify different amounts to erase from the
edges. Touch the required Top, Bottom, Left or Right field. To enter the amount to erase, use
the numeric keypad, or touch the arrows.
5. To mirror the same erase amount applied to Side 1 on Side 2, touch the Mirror Side 1 check box.
6. To select a pre-defined amount of erase, use the Presets option.
7. Touch OK.
SSppeecciiffyyiinngg tthhee SSiizzee ooff tthhee OOrriiggiinnaall
Use the Original Size feature to set a standard or custom size for scanning, or for the printer to
determine the original size document automatically. You can use this feature to enable mixed-size
original document scanning.
To specify the original size:
106
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Xerox® Apps