2. To separate the left end of the document cover from the lens assembly, continue to lower the
lever.
3. Using a soft, lint-free cloth moistened with water, wipe the mirrored glass, metal strip, both sides
of the white-plastic strip, and the rollers. If dirt is difficult to remove, moisten the cloth with a
small amount of neutral detergent, then wipe the parts dry with a dry, soft cloth.
Caution: To prevent damage to the film around the glass, do not press heavily on the
mirrored glass.
4. Return the document cover to the original position, and ensure that the lever is locked in place. If
you touch the document cover, before you close the document feeder, clean the cover.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
245
Maintenance
To Next Page
Loading...
