Xerox AltaLink C81 Series - Page 275

5. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into
the cartridge.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler
until it clicks.
7. Close the finisher front door.
RReeppllaacciinngg SSttaapplleess iinn tthhee OOffffiiccee FFiinniisshheerr
Replacing Staples in the Main Stapler of the Office Finisher
Caution: Do not perform this procedure when the printer is copying or printing.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
275
Maintenance